Features
- Ideal for indoor location
- Systems can be located in machine room
- Wide selection range of compressors in single cabinet
- Pre-wired control panel with main disconnect, breakers, contactors and time clocks
- Pre-piped to one point with controls installed for each system
- Oversized water-cooled condensers to reduce compressor run time – lower electrical bill
- Vertical air discharge body cooling fan for semi-hermetic compressors mounted and wired – lower head pressure
- Lift-off excess doors for fast servicing
Benefits
- Less inside floor space used for refrigeration equipment
- More cooling available for less KW usage
- One electrical power connection
- One pitch pocket for refrigeration lines
- Energy efficient system, lower service and maintenance cost
- Vertical air discharge – improved compressor cooling
- Installation cost reduced due to multi-compressors installed in single cabinet with water valves
- Lift-off doors – easy, fast servicing of equipment
Description
The Airdyne “Indoor-Pak” water cooled refrigeration systems are designed for indoor application for ease of installation in multi-story buildings. Food service operators require dependable refrigeration systems for walk-in coolers/freezers, under counter refrigerators/freezers, refrigerated back bars, bottle and draft beer coolers and ice machines.
“Indoor-Pak” water-cooled refrigeration systems are factory engineered utilizing safe CFC’s for 2 to 24 compressors. Each compressor is equipped with liquid line drier, sight glass, suction vibration eliminator, head pressure control, high-low pressure control, refrigerant receiver and water-cooled condenser. Water supply and return headers are installed in the system with stubouts. Each compressor is equipped with shut-off valves for supply and return to isolate each system from main headers. All system circuits are labeled for easy identification with system numbers, refrigerant used and description of equipment being serviced.
“Indoor-Pak” system requires only single point electrical connection from factory mounted and pre-wired control panel complete with main disconnect switch, compressor circuit breakers, fuses, contactors, and time clocks. This substantially reduces up-front construction costs for expensive multiple electrical power lines and fused disconnects for each compressor.
Finally, the unit is shipped to the job site with all components mounted, thus reducing field installation time. The systems are tested and assembled under strict quality control procedures, pressurized and sealed with inert gas prior to shipment to insure a leak free system.
- Energy-Efficient Remote Multi-Compressor Single-Unit Refrigeration Systems for Water Cooled Units
- Modular Design for Energy Management
- Efficient, Economical Options for Business Today
- Indoor-Pak Remote Refrigeration Systems That Utilize Safe CFC’s and Water Cooled Condensers
Specifications
| Model No. | Maximum No. of Compressors | Dimensions (Inches) | Indoor-Pak Enclosure Wt/Lbs. | ||||
| Full Hermetic | Semi Hermetic | L | W | H | |||
| Single Tier | IPS-1 | 4 | 3 | 46 | 40 | 35 | 300 |
| IPS-2 | 6 | 4 | 70 | 40 | 35 | 400 | |
| IPS-3 | 8 | 6 | 94 | 40 | 35 | 500 | |
| Double Tier | IPD-1 | 8 | 6 | 52 | 40 | 68 | 450 |
| IPD-2 | 12 | 8 | 76 | 40 | 68 | 600 | |
| IPD-3 | 16 | 12 | 100 | 40 | 68 | 700 | |
| Triple Tier | IPT-1 | 12 | 9 | 52 | 40 | 80 | 550 |
| IPT-2 | 18 | 12 | 76 | 40 | 80 | 700 | |
| IPT-3 | 24 | 18 | 100 | 40 | 80 | 800 | |